MD80 Camera mount for MJX X400 quadcopter

pinshape

Summary Simple Mount Adapter for MD80 Spy Cam on MJX X400 Quadcopter. Design Allows "Ear Bud" Stalk to Serve as Pin, Securely Holding Camera in Place. To Prevent Pins from Falling Out, Philips Screw Drivers are Used to Splay Ends and a Soldering Iron Creates a Notch. The camera is designed to pivot under its own weight after takeoff. The mount screws into the same fastening locations as C400x cameras typically used with the MJX X400. Removing the internal battery from the MD80 and connecting it directly to the C4005 power source was attempted, but it resulted in a significant voltage drop causing the camera to power down. This modification is not recommended. Print Settings Rafts: Not Required Supports: Not Necessary Post-Printing Instructions Cleaning Up the Mount After printing, cleaning up the slot and pin holes is necessary to allow the pin (ear bud stalk) and camera to move freely in the mount. The pin is usually a tight fit inside the camera itself.