McLaren Speedtail Wheels

cults3d

This set recreates the wheels sported in the new McLaren Speedtail, even simulating the static aero covers used at the front (See instructions). They are ideal for the 1/64 Hot Wheels version, but may be good for the Tomica model as well (it wasn't tested yet). IMPORTANT: As in the real car, rims are different in left and right sides. You can check those details in the images as well as tire orientation. Wheels are separated in pieces in order to make painting or any process in your modelling easier, and also to make possible to print tires in flexy resin. However, there is a version with rim and tire forming a single piece. You can print both rim and tire in standard resin too, but a bit of sanding shall be made in order to make them fit without too much effort. WHAT'S IN: STL Files for each piece STL Files WITH SUPPORTS for each piece STL Files for single piece rim+tire Detailed Instructions Wheels Dimensions Front Outer Ø= 10,8mm Width= 5mm (tire) 5,8mm (overall) Rear Outer Ø= 11mm Width= 5,5mm (tire) 6mm (overall)