MATT's Customized Phone Wall Charger

thingiverse

Instructions for the Customized Phone Case Project: Using the following parameters to create a customized design: * text_depth is set at 0.6 units * BaseHeight is adjusted to 12 mm * Total Height of the phone case is designed at 40 mm * CScrewCountersinkDepth is precisely set to 10 mm * Custom font "write/orbitron.dxf" is chosen for printing * Countersink dimension is calibrated at 3 mm * BackAngle is angled at 1 degree * Left screw hole feature is enabled * Font size for the design text is scaled down to 7 points * TextYModifier adjusts vertical position by a factor of 1 * Printed text displays the name "MATT" in large font * Right screw hole feature is intentionally disabled * Phone's zero point (Z axis) is offset at 9.2 mm * The x-coordinate of the phone's origin is adjusted to 61.2 mm * Wall thickness around the entire perimeter is reinforced by 2 mm * Screw diameter in counterbored holes measures exactly 3.85 mm * A slight slack value of 1.0 mm ensures accurate hole positions * Counter sink depth of screw holes is optimized at 8 mm * Holediameter or hole size on outer circumference is calibrated to 3 mm * Depth modifier for holes has no adjustment * Z-axis charger attachment is secured by design dimensions of 5.8 mm and an x-coordinate value of 10.6 mm * Tolerable Slack parameter is finely adjusted to 0.2 units * The inner band, also known as "inner angle", measures at a specific 2 degree increments