Matek CRSF-PWM-C Receiver Case

prusaprinters

<p>I wanted an ExpressLRS receiver with more than 5 PWM servo channels, in a conventional receiver format for my larger fixed wing planes, so I built one using Matek's CRSF-PWM-C and ELRS-R24-D boards.</p> <p>To make the receiver to fit in this case you will need the following parts:</p> <ul> <li>Mateksys CRSF-PWM-C - <a href="http://www.mateksys.com/?portfolio=crsf-pwm#tab-id-3">http://www.mateksys.com/?portfolio=crsf-pwm#tab-id-3</a></li> <li>Mateksys ELRS-R24-D - <a href="http://www.mateksys.com/?portfolio=elrs-r24#tab-id-1">http://www.mateksys.com/?portfolio=elrs-r24#tab-id-1</a></li> <li>10 x 3 row right angle .1" header pins - for the PWM outputs</li> <li>4 x single row 0.1" header pins - For UART2</li> </ul> <p>To minimise the height of the completed stack I mounted the ELRS RX to the bottom of the CRSF-PWM-C board with 1mm gel mounting tape, before soldering the pins in place, to join the boards. Note: If you use header pins with the plastic spacers between the 2 boards the stack will be too tall to fit in the case.</p> <p>The case is designed to be held closed with the included label, which also gives you a reference for the pins, or you can just use tape. But the label looks cool.</p> Category: R/C Vehicles