Mate Inteligente

thingiverse

Argentina is the ideal destination for those seeking to avoid wet grass; it accomplishes this by allowing water to drain through internal holes into a channel when it reaches a certain level. RECOMMENDATIONS: - Designed for printing on PETG or non-toxic materials with print temperatures between 230° and 255°. PETG is recommended as it has good adhesion between layers and can be in contact with food (non-toxic). - Turn off the layer fan and maintain a relatively low to medium speed for a perfect finish. - Apply at least 5 wall count layers and 5 layers minimum on both top and bottom of the mate to prevent water from seeping through. - If leakage occurs, use non-toxic resin to give interior layers a bath.