Master Spool Prusa Mini Edition Das Filament Remix

prusaprinters

<p>This is a 'remix' of Das Filament Masterspool. I remodelled the Master Spool and split it into multiple pieces to fit on the Prusa Mini Build Plate. There are now 5 prints total: The big center parts (Part A and Part B) as well as the different side parts (side part A and side part B) and the three screws.</p> <p>The center parts connect to the alternating side parts via dove-tail links. Glue can be used to make the fit more secure, however the tolerances of 0.1 mm made the connection really strong in my print.<br/> Once the assembly is done of the center and side parts, the two halves of the Spool can be slotted into each other (they automatically line up) and secured using the three screws. In my opinion using extra screws makes the line-up of the cutouts and the installation of the filament refill easier.</p> <h3>Print instructions</h3><p>I modified these parameters from the existing "0.25 mm - Draft"-Profile on the Mini to speed up the prints:</p> <p>Horizontal shells:<br/> Top layers: 3<br/> Bottom layers: 2</p> <p>Infill: 10 %</p> <p>On the screws I added a 2 mm brim to help with print bed adhesion.</p> <p>The spool feels quite sturdy even with the reduces number of horizontal shells and infill.</p>