Maslow linkage standoff

thingiverse

This is designed as a riser for linkages specifically made and sold by pillageTHENburn for the MaslowCNC. The standoff has a recess in the top that allows an included washer and locknut to sit inside the riser. Enough room was also allowed for a Kobalt brand socket. After securing the spacer down to the sled, a second larger washer should ride on top of the riser, followed by the linkage, then another washer and another lock nut. 10/24/17 Update: Everything seems to bolt up well. The 10-24 bolts thread onto the standoffs without any issues. I ran the same drill bit I used to drill holes in my sled down the standoffs so I wouldn't have to thread them on. However, the 10-24 pan head bolts that came with the linkage were a little too short for me to screw the nut on. I've ordered 4.5" long screws which I think will work well. 10/27/17 Update: The chains are now parallel to the work surface without the sled on any wood to be cut. I've uploaded version 2 (v2) that shortens the standoffs so the chains will be parallel when on 3/4" plywood. This should also work fine on 1/2" plywood too. I highly recommend using version 2.