Mask Relief Ear Saver Straps with Dispenser Stand Holder

thingiverse

The ultimate printing machine is designed for lightning-fast production and minimal material usage without sacrificing functionality. Fast-print stack holder allows for effortless transport and dispensing. The stack holds a whopping 75 units, ensuring you never run out of material in the middle of a project. A secure lock can be used to keep straps firmly in place against the stand, preventing any accidents or malfunctions. | Stats | | | | | --- | --- | | 1 strap | Prints in just 6.2 minutes, weighing only 1.6 grams | | 1 kg spool | Can produce a staggering 625 straps | | Printing non-stop for 120 straps | Can run for up to 16 hours on an Ender 3 | To get the most out of your printing machine, we recommend using these recommended print settings for faster printing on Ender 3. Note that speeds may vary depending on your board - if you're using a 32-bit board, you should be able to achieve these speeds. | Recommended Slicer Settings for Straps and Lock | | | | | --- | --- | | Layer Height | 0.2mm | | Line Width | 0.50 mm | | Infill Density | 0% for straps and lock | | Walls | 3 layers for straps and lock | | Use Adaptive Layers | Turn it on for optimal results | | Recommended Slicer Settings for Stand | | | | | --- | --- | | Layer Height | 0.2mm | | Line Width | 0.50 mm | | Walls | 2 layers | | Infill Density | 10% for added strength | | Use Adaptive Layers | Turn it off for this setting | We'd love to see your creations! Please share your makes and let's get inspired together!