Marvin's Spacecraft (to fit 3D Hubs Marvin)

pinshape

So many of us out there printing the fantastic Marvin the Martian model, it seemed only fitting for him to have a vehicle to match, complete with navigation console and landing gear. You can choose to print with or without the landing gear. The spacecraft has been designed to fit a standard sized Marvin print. If you've printed or plan to print a scaled version of Marvin, be sure to scale the UFO accordingly. My Print Settings: (your settings may vary) Filament Type - ABS Extruder Temp - 270C Layer Height - 0.2mm Infill - 10% Infill Type - Rectilinear Perimeters - 3 Solid Top/Bottom - 3 Extrusion Width - Perimeters and Top Solid Infill set to same as my nozzle size (0.4mm) everywhere else default (Not required but helps to make a nice sealed print) Print Time - 2 Hours~ If you print the landing gear separately from the UFO, you may need to use a lower extruder temperature and slower printing speed. ABS juice or glue can be used to secure the landing gear in place if needed. You can find the Key Chain-less 3D Hubs Marvin model here published by brainfloat that I've pictured, or the excellent Marvin Advanced published by Shanny Shine here.