Marvel United Mission Cards (Multi-Color)

thingiverse

Remix of xDEFENDtheDENx's cards with backs and different heights for letters and lock to allow multi-color printing at layer changes. The cards in the picture are Clear_Threats_Card.stl, Defeat_Thugs_Card.stl, and Rescue_Civilians_Card.stl. On these cards the text and lock are embossed to allow printing each part in multiple colors, but they are not completely flat. For those who prefer completely flat cards I created alternate *_Flat.stl versions where the text and lock are debossed so that each card is exactly 1mm thick. For the non-flat cards: If printing the cards at 0.2mm layer height, change filament colors before layers 6 and 8 (1.2mm and 1.6mm). Filament change heights are the same for all 3 cards. For the flat cards: If printing the cards at 0.2mm layer height, change filament colors before layer 3 (0.6mm) to have the slots, text, and lock be a different color. Filament change heights are the same for all 3 cards. You may also want to adjust the Z Seam Position so that layer 6 (1.2mm) starts printing the lock first rather than the letters to be more forgiving after changing filament colors.