Marvel Magnets

prusaprinters

<p>So I really liked Polymathic’s Marvel Coasters (<a href="https://www.thingiverse.com/thing:3269260">https://www.thingiverse.com/thing:3269260</a>) and agunski's Avengers Keychain Collection (<a href="https://www.thingiverse.com/thing:3784003">https://www.thingiverse.com/thing:3784003</a>) over on Thingiverse. &nbsp;I thought “yes those, but fridge magnets”.</p><p>They also inspired me to upgrade my Ender 3 v2 to Jyers so I could use the filament switch command, so that was nice too. &nbsp;I made the ones I did since i had the appropriate colors, feel free to experiment with other ones too. &nbsp;I uploaded a blank base with the magnet holes, so go nuts.</p><p>I needed to print mine with rafts, since the small magnet hole circles just would not stick to my bed. &nbsp; YMMV of course. &nbsp;</p><p>I used 5x3mm magnets from Amazon (<a href="https://www.amazon.com/gp/product/B08M3H4VP5/">https://www.amazon.com/gp/product/B08M3H4VP5/</a>) and after some experimentation made the holes 5.2 mm for a bit of tolerance. &nbsp;They were a good friction fit and I tapped them in with a hammer and nail set to be sure.</p><p>The color swap was at layer 21 without a raft and 25 with one (using Cura standard raft settings).</p><p>The only one that needed supports was the Avenger’s magnet so the A could properly hang out of the circle.</p><p>Enjoy!<br>&nbsp;</p>