Marvel Logo Lithophane

cults3d

A new face plate for the 190mm version is now available, designed to work seamlessly with the base.stl file. The original 190mm Panel.stl and 290mm Panel.stl files will not be compatible with the base. The marvel logo with an inset lithophane as the letters is a standout feature of this design. The print comes in two distinct parts: the first 'panel' print, which incorporates the lithophane, and the second 'marvel logo'. For optimal results, the first panel should be printed vertically at a small layer height to achieve the highest image quality. Printing flat without issues is perfectly fine for the second marvel logo. Once both prints are complete, they can be simply glued together to create a unique marvel logo lithophane. Two sizes, 190mm and 290mm long panels, have been included in the design. Scaling a lithophane stl is not recommended. 3D Printing Settings: For the Lithophane Panel: Print vertically (ideally aligned along the y-axis), using a layer height of 0.1, 100% infill, and six bottom, top, and perimeters. For the Marvel Logo: Print flat on bed, using a layer height of 0.2, five bottom/top layers, and an infill of 20%. Check out the complete set of designs at https://cults3d.com/en/3d-model/art/marvel-logo-lithophane-the-complete-set if you're interested in all the designs. Marvel - The Originals: https://cults3d.com/en/3d-model/art/marvel-logo-lithophane-the-original-avengers-junkie_ball Marvel - The Ladies: https://cults3d.com/en/3d-model/art/marvel-logo-lithophane-the-ladies