Martian II Runcam Split V2 Top Mount

thingiverse

Needed a Split V2 top mount for my long-range Martian because I didn't want my props or my standoffs in the picture. It's not the most beautiful thing, but it works perfectly. I was going to use Bubba_Nubba design (https://www.thingiverse.com/thing:2793500), but I'm using large 3000mah and 5000mah 4S lipo packs that fill most of my top plate completely. To solve the issue, I designed my own mount that moved the camera forward. It has an adjustable angle so it can tilt to 35 degrees. However, with the short cable length about 35 degrees is as far as it goes for sure. If you're going to fly hard, I would recommend Bubba_Nubba design; if you're just aiming for long distance and cruising and not planning to crash use this mount instead. I feel that it's strong enough, but with the tension on the cable at max tilt it might not be ideal for aggressive flying in a crash scenario. Install notes: -You need to put the camera upside down so the ribbon cable is at the bottom position. -You need to rotate the split board so that the ribbon is closer to the camera unit. -You need to use that black mount that came with the camera, the same one you used to mount it to the Martian frame. If you need me to print this in TPU for you, please purchase it here directly from me on the eBay link below. This helps keep me motivated to share my designs, keeps the old lady off my back, and helps me buy more drone and 3D printing stuff. I can also print other things for you too which I can add to the box to save shipping costs. http://ebay.us/sC9wir?cmpnId=5338273189