Marshall inspired Key Holder

cults3d

A tribute to the legendary Marshall amplifier. This is my take on their most famous product in 200x100x35 mm. I designed the whole thing to feel as close as possible as its bigger brother. Therefor, I wrapped the Frame in leatherette and got some mesh for the speaker plate. You can see my result and the build process in the pictures. All in all it took me around 12 hours to print, but I used a larger Nozzle (0,8mm) for the Frame. It got covered in leather so the outside surface didn't need to look smooth. You won't need any supports, but have to clean up the frame on the inside after printing to allow the other components to slide in. The whole thing does only require glue to attach the corner protection to the frame. Any other connection is mechanically. Therefore, you can disassemble the whole thing if any of the parts might break during use, but you will need some additional hardware. Parts needed: 8x M3x8mm Screws (to mount the speaker plate and the strap to the frame) 2x M3 Nut (inserted into the strap attachment and permanently glued) 5 x 6,3 mm AUX socket 5 x 6,3 mm AUX connector Optional parts: 210 x 290 mm (A4) leatherette or vinyl leather for car wrapping; the thinner, the better; for the frame 200 x100 mm mesh for the speaker plate 183,5 x 35 mm Brass plate (replacement for the button plate; 10mm holes for the AUX sockets need to be drilled I will add cutting patterns for both frame and speaker plate Hope you like my design. Have fun making Dobby