Mars 2 Pro Sovol Magnetic flexible steel plate Shim/ Mount/Spacer

thingiverse

I am new at Blender so the spacer is very basic but it works. For Mars 2 Pro - Designed this thing to add space to be able to use Sovol 3D Magnetic flexible steel plates. https://www.amazon.com/gp/product/B08V8QCKYF The Z axis needs a spacer between the bottom sensor flag and the build plate support. The spacer is same thickness as flex plate and adhesive magnet combined and MUST be printed and installed before using the Sovol flex plate. Failure to do this is likely to destroy your LCD panel as the printer still thinks the bottom position is nearly 3mm lower. Parts needed: - 1 x this spacer printed - 2 x 3mm x 8mm screws -(You will need to replace the 2 x 5 x 3mm screws with longer screws at about 8mm to account for the extra thickness.) - Flex Plate kit -url linked above. Instructions: Print spacer. Remove bottom sensor flag by its 2 x screws. Insert spacer between flag and build plate support Fix with 2x 3mm x 8mm screws of your choice. Fit adhesive to Build plate as per Suppliers instructions. - very important! Fit Flex sheet to build plate. Re-set Z home position. All done, happy printing. Congratulations, you will now have an easy way of removing prints without spatulas and scrapers, -just bend the flex sheet. The down side to this installation, is that you lose 3mm of height of printing. So if you had G-Coded your Z axis up to 73 mm, now it will be 70mm.