Marlin 2.0.2 & 2.0.1 for Anycubic 4MAX pro

thingiverse

V2.0.2 out of the box-> the screen does not work V2.0.2 with screen -> the screen works Some key points to keep in mind, extremely important: - The hotend temperature sensor PID configuration could require some changes and of course tuning it. The Pid_max = 150 - S curve disabled. If you face shifting layer issues in Y axis try enabling it. - Z offset -1.42 -> depends on each machine - Linear advance K factor in configuration_adv should be changed in the firmware or in the Gcode - The runout filament only stops the printing, does not allow its change. V1_1 published: the changes are: - Using the correct Marlin like hotend and hotbed sensor number (11) - PID for hotend updated accordingly Based on the work of Jonas Plamann and all the people who contributed in this GitHub: https://github.com/Poket-Jony/Marlin-A4MaxPro-2.0.x?fbclid=IwAR0KaxewGQaMAMfd21ztFa7PuVJQLy5wNyTTuI6sd6TU464uHRjozXf3bus In this GitHub there are many many info about the features of this code. I generated two different new versions of firmware for the Anycubic 4Max Pro. What I did is take the latest Marlin stable version available now (2.0.1) and update it accordingly to include all the printer features like the TFT screen, filament runout sensor and so on. There are the following files: - The out of the box Marlin 2.0.1 package: Marlin-2.0.x.zip - The updated version with the Marlin out of the box filament runout feature and code: 2020_01_09_Marlin-2.0.1_anycubic.zip - The updated version with the Anycubic filament runout feature and code: 2020_01_09_Marlin-2.0.1anycubic-_all_anycubic.zip - The information about which files have been updated or required: marlin_2_0_1_stock_to_ANYCUBIC.docx Some key points to keep in mind, extremely important: - The hotend temperature sensor PID configuration could require some changes and of course tuning it. The Pid_max = 150 - S curve disabled. If you face shifting layer issues in Y axis try enabling it. - Z offset -1.42 -> depends on each machine - Linear advance K factor in configuration_adv should be changed in the firmware or in the Gcode