Mario Wall Style Amiibo Stand (Customizable)

prusaprinters

<p>This is my attempt to create a Mario wall type Amiibo stand.</p> <p>It prints easy without any supports. Use 0.2mm layer height and 7% infill with a triangular infill and 3 walls to make it beefy.</p> <p>The brick joint area needs to be printed four times and should be black or any other dark color you like. It will be glued into the cube.</p> <p>Print the block in terracotta or some other earth kind color and the grid in black. It will fit right in and just needs a little glue. If you don´t want to print the small joint grids, when you can use a sharpie to color the gap between the bricks to get the effect.</p> <p>As always the FreeCAD source file is included.</p> <p>Happy Printing</p> <h3> Print Settings</h3> <p><strong>Printer:</strong></p> <p>TronXY X5</p> <p><p class="detail-setting rafts"><strong>Rafts: </strong> <div><p>No</p></div><strong>Supports:</strong></p> <p>No</p> <p><p class="detail-setting resolution"><strong>Resolution: </strong> <div><p>0.2</p></div><strong>Infill:</strong></p> <p>7%</p> <p><strong>Filament:</strong> Noyes PLA Terracotta, Black <br/> <p class="detail-setting notes"><strong>Notes: </strong> </p><div><p>7% of infill is far enough if you use some triangular infill and 3 walls.</p> There is no support needed. Any printer should be able to bridge the brick gap.</div></p> <p>The black joint element needs to be glued in.</p> </p></p> Category: Sculptures