Marco's Wand

myminifactory

A 3D printed replica of Star Butterfly's wand shape taken by Marco in the third season of Star vs the forces of Evil is now available for download. Instructions are as follows: Download the STL files and print them using the specified settings. Blade.stl should be printed with a 0.15mm layer height, 15% infill, and no supports. Jewel.stl requires a 0.10mm layer height, 10% infill, and no supports. FaceA.stl, FaceB.stl, and Cover.stl need to be printed with a 0.30mm layer height, 25% infill, and supports enabled. Wing.stl must be printed twice with a 0.30mm layer height, 20% infill, and no supports. OrbA.stl and OrbB.stl require a 0.30mm layer height, 25% infill, and supports enabled. OrbPin.stl should be printed twice with a 0.20mm layer height, 50% infill, and no supports. UprCap.stl requires a 0.30mm layer height, 30% infill, and no supports. Rod.stl must be printed twice with a 0.30mm layer height, 50% infill, and no supports. RodPin.stl should be printed twice with a 0.20mm layer height, 50% infill, and no supports. LwrCap.stl requires a 0.30mm layer height, 30% infill, and supports enabled. TipA.stl and TipB.stl need to be printed with a 0.10mm layer height, 25% infill, and no supports. Once all the pieces have been printed, assemble them according to the diagram provided. Using superglue (cyanoacrylate) is recommended for holding them together securely. The parts can be easily painted using acrylic paint.