Map from the Princess Bride - Hueforge Print
thingiverse
Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm. If you're willing to do some maths, you can reduce print times by using a layer height modifier to print the base layers at a taller height. I printed this on a 0.4 nozzle, which sacrificed a bit of the detail in the lettering. You might be able to get away with a 0.2 nozzle but it might take a lot longer. This was a **17 hour** print on a 0.4 nozzle. **Filaments Used:** - PETG JAYO Black Transmission Distance: 0.3 - PLA+ eSun Grey Transmission Distance: 1.4 - PLA Sunlu Beige Transmission Distance: 8.2 - PETG JAYO White Transmission Distance: 6 **Swap Instructions:** - Start with Black - At layer #20 (0.92mm) swap to Grey - At layer #22 (1mm) swap to Beige - At layer #25 (1.12mm) swap to White for the rest.
With this file you will be able to print Map from the Princess Bride - Hueforge Print with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Map from the Princess Bride - Hueforge Print.