Mando_Electro_Minocular

Mando_Electro_Minocular

thingiverse

This thing was made using Tinkercad. Update, I just replaced the stl file with one that has a lower facet count and fixed manifolds. Please download the new file if you downloaded the previous file. This model is my own design for an alternative Star Wars Electronic Binocular kit. It's a minocular based on my Micro-Electro-Binocular that you can find here: https://www.thingiverse.com/thing:2765967 All of the greebles are static. When constructed, this model measures 66.25mm wide, 150.50mm from front to back, and 82.55mm tall. The front (objective lens) is designed so that you can add a piece of acrylic or glass before gluing it in place. The shaft is 25.5mm long, so you'll need to subtract the width of your lens from the shaft before assembly. The ocular lens is simply a recessed square cutout (36mm x 22mm) so that you can add a backlit screen. The inside is hollow and there are front and back end caps screw points, so you can add a battery and simply unscrew one end to change out the battery. I haven't built this model yet, so there may be a fair amount of sanding that may be needed to get all the parts to fit together properly. I recommend using Velcro inside to hold the battery in place. I haven't made holes for the switches, giving you the option to place them for thumb or forefinger activation. There is a 3mm hole in the objective end cap for a 3mm LED and there is a rectangle hole on the endcap for the addition of a 10 LED segment bar. I plan on using the Hypnotic Bar Kit from Chaney Electronics, you can find it here: https://www.electronickitsbychaneyelectronics.com/prodinfo.asp?number=C6772 Feel free to tinker with the model and come up with your own ideas. Note - I didn't make lanyard loops on the model; however, if you want to add a leather lanyard, you can use two small D-ring picture hangers at any of the screw points. Share, print, and tinker as you wish and enjoy. Once I build this model, I will update this thing with pictures.

Download Model from thingiverse

With this file you will be able to print Mando_Electro_Minocular with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Mando_Electro_Minocular.