
Malahit SDR DSP2 and DSP1 Stand
thingiverse
This is a stand for the original Malahit DSP2 radio receiver from malahit_sdr@rambler.ru I designed this because I prefer to use the Malahit in a 45° tilted position, which is a lot more fun than to use it at 0° or 90°. Please note that the big version is a tight fit; so <b>be sure to check the result after some layers before printing the whole thing</b>. You could try to print in 101% size for x and y, when oriented in the printer like in the picture I supplied. I added two "light" versions (2b, 2c), to improve the audio and for a faster printing experience. The "light" versions should fit without any problems. At least they did when printed with my UM3. Version 2b is easier to grip. Note 15-Sep-2021: I added a smaller version (MalahitDSP1Stand_123mm.stl) for the Malahit DSP1. Try at your own risk. I don't own a DSP1, so I could not verify if it fits... Note 16-Sep-2021: upon request I added another version for the DSP2 with a front tilt angle of 52° instead of the standard 45°. Note 16-Sep-2021: I added another "light" DSP2 version with a front tilt angle of 65° and 45° (MalahitDSP2Stand2b_65_45DEG.stl). Just turn it around to use the other angle. My current personal favorite. Note 17-Sep-2021: due to an initial mis-measurement of the lenght of the DSP1 I had to correct the DSP1 model. The new model file name is MalahitDSP1Stand_123mm.stl. If you downloaded the DSP1 stand before Sep 17th, discard the model file and get the new one. Have fun. Note 06-Nov-2021: Due to a request by petrivan I increased the thickness of the side parts to improve the stability of this (MalahitDSP2Stand2b_65_45DEG.stl) model. Good proposal, I appreciate it.
With this file you will be able to print Malahit SDR DSP2 and DSP1 Stand with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Malahit SDR DSP2 and DSP1 Stand.