Makita RT0700C MPCNC Mount fits 25mm and 25.4 mm pipes

thingiverse

Update 14.12.2018 Modified the template for this holder to fit 25.4mm pipes filename tooltemplate_25.4mm.stl is uploaded in the files section. Enjoy Yeah, and I also uploaded a toolholder without the laser mount on the side; you'll find it in the files section: Update 25.11.2018 This update isn't about construction; more about reviewing the v2 toolholder. I've been testing it for some time now, and it has worked great. I'm working on the dust collector. The router is nice and cold after 5-6 hours going at high speed - that's really good. Update 22.04.2018: Makita Toolholder V2.stl This is my new version of the toolholder; on this, you'll have air blowout on the side and not down. You will need these files. makita toolholder v2.stl tool release button v2.stl -------------------------------------------------------------------------------------------------------------------------- Update 24.03.2018: For a new cable mount on the Makita: M3x20mm (2x) and 2x M4x20mm bolts, 2x M4 nuts. Makita Cable Lock 2.stl Makita Cable Lock 1.stl mal1mm.stl is just a drill template so you get the holes right. Cable relief for the laser mount: bolt on the original mount. lasermount cable relief.stl This router mount is designed to fit the 25mm pipes on the MPCNC. It has a magnetic dust shoe - not tested yet. The mount also has quick connect of the laser mount on the side, and a pen holder. The whole thing is mounted with M4 bolts and M4 nylock nuts. Outer measurement on my M4 nylock nut is 6.88mm so these fit really snug into the design; you'll need 17 of these. You also need 9 M4x20mm bolts with hex socket head; outer diameter on the bolt head is 7mm. 4 x M4x20mm with Phillips-head bolts to mount the toolplate to the Z-axis. Everything fits very well in this design, so it's easy to build. Magnets: you'll need some to hold the dust shoe in place. Neodym magnets - 10x1mm disc magnets are what you need. Laser: it is this one, and it bolts right on my mount with 4 M3x10mm bolts. https://www.ebay.com/itm/Focusable-Engraving-450nm-3W-Blue-Buner-Laser-Module-TTL-Laser-Cut-with-Goggles/262995306983?hash=item3d3bbde9e7:g:se4AAOSw4CFY1Nxe To print out the parts, it's nothing fancy; only place I used support was in the dust shoe.