Makita DHS680 dust nozzle (196961-1) adapter for Dyson DC19

prusaprinters

Dust collection does wonders. When i used circular saw for the first time i ended up all white from pieces of wood that i was cutting. Thats when I became dead set on connecting my good old Dyson DC19 vacuum cleaner to cutting tool.And here it is, dust nozzle adapter for Dyson DC19 and Makita DHS680 or any other ciruclar saw that uses 196961-1 dust nozzle part.In order to attach it you need to take off hard pipe off the vacuum cleaner tube and remove plastic handle to which pipe is connected. Once you end up with loose end of the pipe you plug it into bigger adapter hole and into smaller hole goes the dust nozzle.Its a little bit of tight fit on the dust nozzle side but that's good, you don't want your hose to break free while operating on cutting machinery.Recommended print settings:layer height: 0.1mm or adaptive (0.1mm around curves and 0.2mm on straight parts)supports: yes, everywhere, see below for print orientation to minimize supportsprint orientation: place it with smaller end on the print plate, to do so right after importing part to slicer rotate it by 180 + 22.5 degrees (see screenshot from Prusa Slicer)