Makers Mashup Torture Test Cube

thingiverse

This can be a tough test of patience. It includes multiple challenging tests in one. **Start at 50% scale** The overhang test is located on the bottom. The span test runs across the back. The cube size tolerance is set to 60mm. Multiple circle tolerances are also included. Stability printing for an inverted cone is a key feature. The print design allows you to easily adjust its size, making it perfect for experimenting with different settings. This example is printed at 50% scale, which will significantly speed up the printing process. Printing at full size may produce better results on the span test, but it can be more difficult to achieve stability with the inverted cone inside. You can print this design with zero infill, and I was able to successfully do so at 50%. However, achieving the same result at 100% is more challenging. Concentric infill is particularly difficult at full size due to a lack of internal supports within the cone. Triangle infill at 1% works great without significantly increasing printing time. Be prepared for some failures along the way. I would love to hear about your experiences with this design, including which printers it works on and what settings you used. To date, I have successfully printed the full-size version in as little as 1.5 hours at .3mm using an Ender 3. This design features the Makers Mashup logo from my blog and YouTube channel. It was printed with AIO PLA Filament, available on Amazon. I would like to thank Mekius for suggesting this cube design. If you need more help building this or have questions, please join my public Discord chat server. I'm always happy to assist. ### Suggestions? If you have suggestions for new projects, feel free to message me here on Thingiverse or through my blog and YouTube channel.