Makergear Filament drive goes Bowden
thingiverse
Transform an existing makergear filament for Bowden use with a pneufit by utilizing the Bowden Connector part. Alternatively, print a modified Filament Drive that already accommodates a pneufit. Ensure proper space for the ball bearing. Gather materials such as M4x16 S/S allen bolt cap screws, M4 S/SS hex full nuts, an M4 washer, 625 ball bearing, a NEMA-17 motor with an integrated Planetary gearbox (5:1 ratio), a Pneufit straight adaptor (1/8inx4mm), and spur gear #S10T05M022S0508 from SDP/SI. Additionally, need M3x25 bolts, M3 washers, M4x16 bolts, M4 nuts, and M4 washers (for Rostock Mini motor mount). For the motor mount, require M3x16 bolts, M3 nuts, and M3 washers. To assemble, create an M10 thread, tighten the pneufit, check filament alignment, and adjust firmware settings to 520 steps per mm with 16 microsteps using a 200 step motor.
With this file you will be able to print Makergear Filament drive goes Bowden with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Makergear Filament drive goes Bowden.