Majorette logo

prusaprinters

The STL file can be divided into parts for easier coloring. AMS recommended. Printing on textured plate:Use slightly higher nozzle and bed temperature for the first layer when printing to have fewer gaps between colorsPrint slower for better quality, set initial layer and initial layer infill to 50 mm/s, outer wall, inner wall and top surface to 100 mm/sPrinting on smooth plate:Set initial layer height at 0.1 mm and initial layer width 0.3 mmUse slightly higher nozzle and bed temperature for the first layer when printing to have fewer gaps between colorsPrint slower for better quality, set initial layer and initial layer infill to 20 mm/s, outer wall, inner wall and top surface to 100 mm/sAdding holes for magnetsYou can easily add holes for magnets in the slicerRight-click on the objects and select Add negative part - cylinderScale the cylinder to the size of your magnets, make it slightly bigger so the magnet can fit inPlace the holes (negative parts) where you want to position the magnetsSlice and printCommercial UseThis model is only available for non-commercial use, you can print it for yourself or as a gift for others, but you may not sell or alter the model. If you are interested in obtaining a commercial license please visit my Patreon store: https://patreon.com/noordinaryleaf