Mahomes Box

thingiverse

CHIEFSSS!!!!!!! Unfortunately, the supports were extremely difficult to remove at such a thin layer height, so I wouldn't call this print a total success. It's still pretty cool to me, but not as cool as I had hoped. Print if you're a diehard fan only. This is simply a personalized remix of the Small Parts Storage Box (increased to 130% the original size). How I do it: First, print the hinges/latch file at 75% infill, then print the top and bottom at 15% infill with a high number of walls (to ensure where the latch/hinges attach is sturdy enough). REQUIRED to Complete Assembly = M4 x 30mm bolts, M4 lock nuts Quantity = Six bolts, six nuts (M4 x 35mm bolts would probably work better, but I haven't tried to find them yet because the 30mm are working fine) I've had issues with where the hinges/latch attach, so I print with a high number of walls (5 using profile:magic.28) and 15% infill. Enjoy! This is one of several remixes of this box I have created. Check the others out if you're interested!!! NOTES: The imprinted design on the Box TOP requires supports when printing, but everything else can be printed without supports. After printing, I always clean up the holes with a 4mm drill bit so the bolts fit in easily.