MagTag Case and Stand

prusaprinters

<p>3D Print a Snap Fit Case or Stand for the Adafruit MagTag</p> <h3>Print instructions</h3><p>This case is designed to protect the MagTag. It features cutouts for the four user buttons, USB-C, and on/off switch. The reset and DFU side buttons feature reliefs that allow the overlays to actuate the switches. Use vinyl to create covers with beautifully glossy holographic decals.</p> <p>Want to prop up the MagTag on your desk? This simple 3D printed stand mounts the MagTag at a 70 degree angle for perfect viewing. The wide bottom prevents the stand from tipping over. An hole in the lower center allows a STEMMA cable to pass through for connecting other I2C sensors.</p> <p>Adafruit MagTag<br/> <a href="https://adafru.it/4800">https://adafru.it/4800</a></p> <p>420mAh Battery<br/> <a href="https://www.adafruit.com/product/4236">https://www.adafruit.com/product/4236</a></p> <p>M3 Magnet Feet<br/> <a href="https://www.adafruit.com/product/4631">https://www.adafruit.com/product/4631</a></p> <p>Learn Guide for Assembly Photos<br/> <a href="https://learn.adafruit.com/magtag-3d-printed-stand-case/">https://learn.adafruit.com/magtag-3d-printed-stand-case/</a></p>