Magneton Figure

thingiverse

A Figure Of Magneton. Self-Explanatory. When Doing Printing, The (x ) At The End Of The File Name Is Indicative Of How Many Times You Have To Reprint The File. For Instance, Magneton Has 6 Magnets, So You'd Need To Print The Magnets File 3 Times Since It's A Pair. Also Remember That The "Left" And "Right" Of The Left And Right Body Files Are Left And Right Viewing From The Front. Print Settings Rafts: Yes Supports: Yes Infill: HIGH Notes: For The Most Detailed Parts (i.e. Screws And The Like), I'd Recommend Going All Out And Printing With 100% Infill. For The Main Bodies And The Base, That's Not Necessary. The Base Should Preferably Have Higher Infill, Though, So It's Heavy Enough To Hold Everything Else On Top Of It. The Bodies Should Have Somewhere Around 30-45%, Although If You Have The Time, Going A Bit Higher Won't Hurt. Print Everything With A Raft Except The Magnets. Make Sure You Remember Which Body Is Left And Which Is Right. I'd Recommend Slapping A Label Or Something On It As Soon As It's Done So That You Remember. Post-Printing As Always, If You Need To, Sand Down Parts That Don't Fit In Place And Use A Few Drops Of Glue To Hold Everything Together.