Magneto

prusaprinters

Originally, I wanted to create a magnetic perpetual motion machine, but that didn't work out, so at least this model was created. It's a hybrid of a fidget, a spinner, and I don't know what else. Have fun with it as you want, one can only rotate, it is also fun to find the point between the attractive force of the magnets.Assembly instructions:Print both gears, then magnet holders-16pcs, axis and knobs.I recommend drilling all the holes so that the holders and magnets go firmly into the holes, the holes in the gears with a 4.5 mm drill and the holes in the holders for the magnets with a 5 mm and 8 mm drill. I therefore chose such a procedure to hold the parts firmly.You can also print holders with the same dimensions, I made them for magnets that I had at home.Orient the magnets so that they attract each other - the outside with the insideI also prepared versions of gers with 8, 16 and 24 teeth, but the 8-tooth one holds best in the handI recommend magnet size 5x3mm or 8x3mm, or their combination, as shown in the pictures. You will also need 2 bearings 608zz.Filaments used: Prusament PLA Viva La Bronze                             Prusament PLA Galaxy SilverFor Czech-Slovaks there is an excellent website for magnets www.unimagnet.cz - a large selection, fast delivery and a nice giftIn case of problems when slicing 3mf files - if holes are missing in the parts, I recommend using the Prusaslicer