Magnetic Token for counting, tallying or anything

prusaprinters

<p>This is basically a magnetic token to hemp me keep count / tally.<br/> It would be good for anything you might need it for. Works well as a light fridge magnet as well.</p> <p>Note: Price is for 10 tokens. Contact us if you would like more or multiple colours etc.</p> <p>Why?<br/> I needed something to help me count laps when I am swimming in the local pool (I keep loosing track).<br/> I thought of many solutions, but decided to go with a token that I could move from one pocket to the other in my swim trucks.</p> <p>I know the PLA would float, which is actually probably a good thing. But I also wanted better control over them in my pocket. So I decided to add a magnet to keep them together. I also fully enclosed it so they will stick together in my pocket.</p> <p>I resolved to use a heptagon instead of a disk to make separating a little easier. All the corners are rounded to make the boundary motion smooth.</p> <p>The magnet I used was a set I had already and it works perfectly.<br/> The magnet dimension is 1.5mm thick, 6mm diameter rare earth metal. see here <a href="https://aussiemagnets.com.au/collections/rare-earth-neo/products/6mm-x-1-5mm-disc-rare-earth">https://aussiemagnets.com.au/collections/rare-earth-neo/products/6mm-x-1-5mm-disc-rare-earth</a>.</p> <p>See this product on our website: <a href="https://3domengineering.com.au/product/magnetic-swimming-token/">https://3domengineering.com.au/product/magnetic-swimming-token/</a></p> <h3>Print instructions</h3><p>The attached 3MF and gcode is for a single token. It will stop at the top of the magnet cavity to allow you to put the magnet in place. Resuming the print will cover the magnet and finish the print.</p> <p>I have uploaded a 5 token gcode to the user prints section if that helps. Otherwise just use the 3mf file supplied and add additional instances as required.</p> <p>If there are any issues please let me know.</p>