Magnetic Hygrometer Sensor Mount for Dry Box

prusaprinters

<p><i>This model requires the common 2mm x 10mm fridge magnets (4 magnets) and some strong glue (glue gun, super glue, etc). The STEP file is included if you want to make any adjustments. Print this model <strong>without</strong> support.</i></p><p>Got some spare filament and want to keep track of the humidity in your dry box without drilling holes? This is the mount for you! The common and reliable rectangular temperature/humidity sensors clip right in. Two magnets are glued to the model and sit flush with the front of the sensor. Put it in your dry box wherever you want and use two additional magnets to keep on the outside to keep it in place. No drilling, no fuss, and easy to reposition.</p><p>The model is designed to use very little filament (2.5m or 7.5g). The provided gcode files also have variable layer height to speed up the print. You only need about half an hour with a 0.4mm nozzle. <i>There is no support needed</i>. The somewhat sloppy overhang for the magnet placeholders help the glue to create a strong bond.</p><p>Once printed glue in one pair of 2mm x 10mm magnets to the magnet placeholders (see photos). Let the glue dry, then position where you want it in a dry box or any other thin transparent surface. Add two magnets to the outside at the same position where you glued the magnets to the model to keep the model in place.</p>