Magnetic Drip Tray Holder for Keezer/Kegerator

prusaprinters

This is a magnetic tray holder that I made to attach my stainless steel drip tray to the outside of my keezer which has 4 taps for my homebrewed beer. There is a “finger hole" on the front so you can easily remove the drip tray for occasional cleaning.The stainless drip tray measures 19 and 5/16" by 4 and 1/16". I used the “Yaebrew” branded one from Amazon. The magnets are neodymium disc magnets from “Lovimag” on Amazon, they were advertised as being 32x3mm however they measured 29.6x2.6mm. The magnet holes are 1.25 in or 31.75mm in diameter.Due to the length of the part I cut it into 3 pieces to print on my MK3S+. Enabling supports for the magnet holes is a good idea. I printed in Hatchbox Woodfill PLA and may try to stain this piece in the future to match my keezer collar. The tray pieces were glued together with cyanoacrylate glue and the magnets were also secured with a drop of CA each. Holds strong onto my keezer!