Magnetic door handle for lack enclosure v2

prusaprinters

<p>The door handles are designed for the lack enclosure v2 (Prusa MK3S-MMU2S). Magnets are integrated in the handles to keep the doors closed and aligned.</p> <p>On my print out I added a name on top of the handles. The files come with a plane surface, so you can add your own name if you like.</p> <p>I provide a drilling template which assists you during drilling the holes into the acryl glass. I recommend using a 4 mm drill and a drill press.</p> <h3>Building instruction</h3><p>For 2 door handles you need:</p> <p><strong>Parts:</strong><br/> 12 x M3x8 screw<br/> 12 x M3 nut<br/> 8 x Magnet (20 x 6 x 1.5 mm, neodym)</p> <p><strong>3D printed parts:</strong><br/> 2 x Left-Front<br/> 2 x Left-Back<br/> 2 x Right-Front<br/> 2 x Right-Back<br/> 1 x Drilling_template</p> <p><strong>Construction:</strong><br/> Print out the 3D parts, see printing instructions.<br/> Drill the holes into the acryl glass by using the drilling template. In my enclosure I placed the door handles 8 cm from top and bottom of the arcyl glass, so that there is no contact with the printer. I recommend using a 4 mm drill and a drill press.<br/> Press a magnet into the holes of all 3D printed parts.<br/> Insert the nuts in into the holes of Left-Back and Right-Back.<br/> Place a magnet into the cavity of Left-Front. Check the orientation of the magnet. It should be attracted by the magnet in the hole of Right-Back. Secure Left-Front with Left-Back and the M3 screws on the opposite side of the acryl glass.<br/> Place a magnet into the cavity of Right-Back. Check the orientation of the magnet. It should be attracted by the magnet in the hole of Left-Front. Secure Right-Back with Right-Front and the M3 screws on the opposite side of the acryl glass.<br/> Due to the tolerances you might have to align all parts.</p> <h3>Print instructions</h3><p>Printed in PETG with standard Prusament settings on Prusa MK3S printer</p> <h3>Slicing settings:</h3><p><strong>Infill</strong><br/> 15 %</p> <p><strong>Supports</strong><br/> No supports</p> <p><strong>Brim</strong><br/> No brim</p> <h3>Print settings:</h3><p><strong>Filament</strong><br/> Prusament PETG</p> <p><strong>Nozzle</strong><br/> 0.4 mm</p> <p><strong>Layer thickness</strong><br/> 0.2 mm</p> <p><strong>Temperatures</strong><br/> Extruder: 250 °C (1st layer 240 °C)<br/> Bed: 90 °C (1st layer 85 °C)</p>