Magnetic Cards Box - Draft & Discard Trays - Parametrized

thingiverse

You just need to print two of these units, which are fully parametrized with Fusion360, so I included the f3d file. I already exported classic MtG boxes in various sizes (50, 80, 100, and 150 cards) as well as MiniUSA boxes in similar quantities. These designs have been created to hold five sets of two millimeter magnets. Note: Be cautious when handling these units, as the magnet positions are critical. To simplify matters, you can use one box with all positive magnet poles on top and another with negative poles on top. To modify this design within Fusion360, focus on adjusting the following parameters: * Card width (currently a shortcut for MtGWidth) * Card length (currently a shortcut for MtGLength) * Number of cards to be stored * Magnet height and diameter; if you're using different magnets, add 0.2 millimeters to the diameter and 0.1 millimeters to the height * Card thickness is set at 300 microns, which aligns with classic MtG card thickness If you need to adjust the unit's height based on sleeve thickness: * Sleeve thickness: this is currently set to 100 microns, suitable for most premium sleeves; standard sleeves typically require a setting of 50 microns. Avoid modifying other parameters, particularly those that are calculated automatically, such as the tangent.