Magnet Key Holder with Logos

prusaprinters

<p>This is a key hanger which can be mounted on a wall. It comes with personallizable key rings, that can be attached to the keys.</p> <h3>Print instructions</h3><p>The print files are prepared as two colour files with a color change. This works for all mashines without a multi material unit of any kind.</p> <p>The gcode-files are prepared for PETG. In the attachend .3mf files other filament types can be chosen. In allmost all files color changes are incorporated. For the specific locations see below.</p> <p>In case you preffer to use the .stl-files, it is recomended to use infil modifiers at specific positions. These are included in the .3mf-files. They increase the infill of the three knobs and around the screw-holes up tp 50%. Furthermore, the color changes (if wanted) should happen at those hights:</p> <ul> <li>wall piece: at a hight of 6 mm, therefore the knobs and the little board will have a different color</li> <li>key ring front parts: at 4 mm, therefore the symbols receive the highest constrasts</li> <li>the key ring backplate will not have a color change</li> </ul><p>The wall piece can be glued or screw on a wall. The included frontplate will cover up the screws, so they will not be visible. Please be aware, that the front plate will need some sanding (fine grid) on the edges, since there is no clearance included. This was designed on purpose so users can accomodate for inaccuracies of their specific printers.</p> <p>The reqiured magnets have a size of 10 x 5 x 2 mm. All required clearances are already included in the model and should work for most printers. Only the front plate (as mentioned above) is made to be sanded to size.</p> <p>I recommend to use leather strips (upcycling old shoe laces) or colorfull pieces of stings/bands to attach the key ring to your key. when using leather, the ends of the strips can be glued together with superglue.</p> <p>Versions:<br/> The wall piece comes in two versions. A slim version and a wide version. The difference lies in the depth of the upper board. The slim board ranges 45 mm (1,8 inches) into the room, whereas the wide board reaches 60 mm (2 1/2 inches) into the room. All other parameters are the same.</p> <p>Any brand logos which are part of this collection are protected by copyright of the brand owners. The creator of these files is not the owner of the brands/brand logos.</p>