Magnet holder on I3Steel

thingiverse

Instructions for a Hall Sensor Magnet Holder on an I3Steel Y-Endstop: Use a printer set at 0.4mm layer height and 0.4mm nozzle diameter. The magnet holder's dimensions are compact, resulting in a solid print regardless of infill level. After printing, use a 6mm drill to complete the hole for the magnet, specifically a 6mm diameter, 4mm thick neodymium magnet that I found ideal. Utilize a 2.5mm drill from one side and a 3mm drill from the opposite side to prepare holes for a bolt, which will cut its own thread, eliminating the need for a nut. I press-fitted the magnet into place; however, you can secure it with superglue if preferred, provided you first ensure that the polarity is correct.