Magic Wand with Secret Compartment (14''/36cm)

prusaprinters

I updated my original wand. This version is longer, stronger and easier to print. The wand is hollow and you can use this space as a secret compartment. To keep this wand simple, I did not add the LED light (for a wand with light, use the original version).Print all the parts and screw them together. Please, leave comments, I am curious if you like it. Thank you. Print SettingsPrinter Brand:CrealityPrinter: Ender 3Supports:NoResolution: 0.2Infill:100%Filament:Regshare PETGBrown Notes For TOP partYou may want to use low speed (e.g. in Cura I set Print speed to 15). This part is super long and slow printing will help to keep it steady when finishing the print. For TOP and HANDLEI recommend to use infill density 100% - that will make the wand stronger. Printing temperatureBe sure you are using the right temperature. It is important, it will make the bonding between layers stronger. You can simply test if your temperature is right - print the TIP with different temperatures and by finger press it on the top. You will quickly find out what temperature prints the strongest parts - if bonding is weak, the top of the TIP will be easily pushed in and breaks. If the temperature is right, it will be very hard to break the tip with your fingers. RaftsI use Raft for the TOP and HANDLE. ThreadsThe inner threads may need a little bit of cleaning and after that they should work just fine. Category: Toys & Games