Magic Wand Effects with Circuit Playground

prusaprinters

<p>Add motion triggered sound and light effects to any prop with Circuit Playground. This magic wand was designed specially to use the Circuit Playground as its centerpiece effect.<br/> <a href="https://www.youtube.com/watch?v=hqGEoQycUnM">https://www.youtube.com/watch?v=hqGEoQycUnM</a><br/> <a href="https://learn.adafruit.com/sword-and-wand-prop-effects-with-circuit-playground/magic-wand">https://learn.adafruit.com/sword-and-wand-prop-effects-with-circuit-playground/magic-wand</a></p> <p>It is 3D printed with a mix of translucent and opaque materials, has a mounting plate onto which you can secure the Circuit Playground, as well as an integrated LiPoly battery and on/off switch.</p> <p>In addition to the Circuit Playground, LiPoly battery, and switch, you'll also need four M3 x 6mm screws and nuts, two M3 x 16mm screws and nuts, and four M2 x 6mm screws and nuts.</p> <h3>Print instructions</h3><h3>Licence: Creative Commons - Attribution Category: 3D Printing Print Settings</h3> <p><strong>Printer Brand:</strong> Ultimaker</p> <p><strong>Printer:</strong> <a href="http://amzn.to/2Bg7tS2">Ultimaker 2</a></p> <p><strong>Rafts:</strong> Yes</p> <p><strong>Supports:</strong> Yes</p> <p><strong>Resolution:</strong> 0.1mm</p> <p><strong>Infill:</strong> 20</p> <p><strong>Notes:</strong></p> <p>Print the star parts in translucent PLA, the rest can be any color you like. You'll need to print ten copies of the trim piece.</p>