Magic Footprint Safe Lock Mount (large)

thingiverse

Presented is a series of safe lock mounts for magic footprint safe locks that are much thicker than my earlier mounts (https://www.thingiverse.com/thing:4572957). The files are as follows: * electronic-monolithic* -- mounts for electronic locks, such as the Kaba X-09. The mount is 23mm thick. * electronic-*-shim* -- shims for behind the dial ring or the lock, as needed. Simply scale along the z-axis for the right thickness. They are 1mm thick by default. * mechanical-monolithic* -- mounts for mechanical locks, such as the S&G 6741. The mount is 23mm thick. * mechanical-12.7-monolithic* -- same as above, but only 12.7mm thick (same as MBAUSA mounts). * mechanical-*-shim* -- shims for behind the dial ring or the lock, as needed. Simply scale along the z-axis for the right thickness. They are 1mm thick by default. * insert* -- inserts for the spots in front (model), on top (brand), and on the back (combination) of the lock. Use as you will. Everything should be able to print without supports, rafts, brims, &c. They are relatively simple, so printing thick and fast should be fine. As safe locks are heavy (especially electronic locks), a relatively dense infill is recommended, e.g., 25% or higher. Photo Credit: DWeb, March 2021.