MagHex Walls for Gloomhaven

thingiverse

MagHex Walls for Gloomhaven ========================== This is a set of walls designed for use with my [MagHex Tile System for Gloomhaven](https://www.thingiverse.com/thing:3530085). These walls feature magnets and wire nail holes strategically placed to securely attach them to the MagHex center mag tiles. ### Features * Wall sections are designed to work as both "flat to flat" and "point to point", allowing you to build every scenario in the book (untested). * Check out [MagHex Doors](https://www.thingiverse.com/thing:3653674) for doors that complement this system. * There are three ways to use MagWalls with MagHex Tiles: 1. Press 3x3mm neodymium magnets into slots on the bottom of the wall segments, creating a friction-tight fit that requires no glue. 2. Press #19 x 1/2" Wire Nails into recessed holes on the bottom of the wall segments. a.(Nail dimensions: 13.5mm long; 2.2mm diameter head; .5mm thick head; 1.1mm diameter shaft) 3. Glue MagWall segments to MagHex Blank or Terrain tiles. ### Notes * MagWall sections come in three types: 1. F type - Used on Flat to Flat sections of terrain 2. P type - Used on Point to Point sections of terrain 3. C type - Used to link sections together at a corner * MagWalls use 3x3mm neodymium magnets, available in bulk from AliExpress or eBay. * The polarity of the magnets must face the same direction and match the polarity of the center magnets used in the center mag bases. * Wire nails can be purchased in large packs for minimal cost ($1.50) at home improvement stores (Home Depot, Lowe's, Ace, etc.). * Some wire nails may need to be cut shorter to prevent them from extending above the model. * These walls are under construction; proceed with caution! (heh) ### Changelog 04.23.2020 * Added Ashlar C4 corner wall, thanks to [bshigenaka](https://www.thingiverse.com/bshigenaka) for the suggestion. 05.30.2019 * Made three new Wood wall segments. 05.27.2019 * Created eleven Stone wall segments with a cavern-like appearance reminiscent of the original tile art. * Added four Forest-themed wall segments, including a giant mushroom that must be printed in two parts and glued together. 05.25.2019 * Split [MagHex Doors](https://www.thingiverse.com/thing:3653674) into their own thing to reduce clutter. Note: This is not an exhaustive list of all changes made to the design.