MacPi Mini v2

prusaprinters

<p>This case supports the Raspberry Pi 2 + 3</p><p>The main difference between v1 and v2 is the added active cooling, with a 40mm fan(max hight is 10mm).</p><p>the case is designed to snap together, except for the bottom feet, that might need some glue to hold it in place, but there is a little cut out on the bottom of the bottom "shell" for aligning the part. The case might also support most heatsink, depending on how tall it might be.</p><p>The screw holes for the pi is 3.5mm in diameter, and for the fan 4mm (max hight is 6mm for the fan screws).</p><p>The foot attaches via 3 lock pins, so no glue or screws should be needed (please refer to pic. no. 3).</p><p>(sanding some of the parts might be needed, depending on your printers settings)</p><p>if there is any flaws or problems printing this, please let me know ^^</p><p>&nbsp;</p><p>&nbsp;</p><p>&nbsp;</p><p>&nbsp;</p><p><br>(i do not claim to own or anything similar, aboutany designs, names or any of Apples inc. intellectual properties , all copyrights belongs to &nbsp;Apple inc. )<br>&nbsp;</p>