M8/M6/М5 lead screw bracket
pinshape
Summary New lead screw mount available for M8 and M5 nuts, featuring mounting on V-SLOT via four M5x10 screws with washers. Two distances between the center are provided: 14mm, mirroring the original D-Bot design, and 21mm, allowing for collinear positioning of the nut and motor pulley. Customization The bracket configuration is managed through the Lead_screw_bracket.SLDPRT Solidworks file. Parameters include: * "nut_min_with" - specifies the width between parallel sides of the nut. * "screew_hole_diametr" - determines the diameter of the hole where the screw will be placed after the nut. * "nut_height" - establishes the depth of the mount hole for the nut. * "screw_distance" - sets the distance from V-SLOT to the center of the screw. Pre-configured sizes are available for M5 and M8.
With this file you will be able to print M8/M6/М5 lead screw bracket with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on M8/M6/М5 lead screw bracket.