M5Stack face plate

thingiverse

M5Stack face plate. M5Stack-facev14.stl: Official height does not match official face plate. You can see on photo that height is 2.1mm lower than expected. Regular proto board fits but requires removal of 8 pins from top and bottom. Connector is offset by 2.54mm, so only half the pins are connected through connector. Designed PCB is required for full compatibility. If using STD proto board, holes for fixing PCB to base are also in wrong place. You can see all this in pictures. Holes for M3 bolts copper inserts are slightly too small. Too much force is needed to fit them easily. M3x5x4 from here https://a.aliexpress.com/AJNEFjo59 were used. The text "M5STACK" does not appear as it should on STL file. V14 test print was made on an Ultimaker S5 with 20% infill and 100μm layer thickness. Height, hole size and text depth issues have been attempted to be corrected. This is the M5Stack-facev15.STL file. PLEASE NOTE THIS HAS NOT BEEN TESTED