M43/MTF to MD Lens Adapter

M43/MTF to MD Lens Adapter

thingiverse

MICRO FOUR THIRDS LENS ADAPTER This adapter will allow you to fit a vintage MD lens (Minolta/Rokkor) onto a Micro Four Thirds camera. This particular model was designed for my Lumix G85 with a Minolta 50mm f2.0 Lens, but it should fit* any MTF camera. Enjoy taking advantage of vintage lenses to create incredible photos on modern cameras. PRINTING NOTES PLA shrinks, and different printers have different tolerances, if the print is either too large or two small, try adjusting the scale by +- 1 percent. REMIXING NOTES The print is essential broken into 3 distinct parts: MD Adapter, Shaft, MFT Adapter. If the print needs adjusting, you can open up your preferred CAD, cut, and scale each component to specs. If the image from your lens is blurry when in infinite focus, adjust the length of the shaft in increments of about a millimeter. You can determine the correct "Flange Distance" for your camera and lens by searching the "Flange Distance" for your particular camera. *Different Cameras have different mechanisms that affect the operation of the camera when it does not detect a lens. For instance, in this model, there is a small hole cut from the face of the adapter that fits into a button on the face of the Lumix G85's lens mounting plate. || The Lumix G85 will not operate normally unless that button is free inside of the hole in the adapter.

Download Model from thingiverse

With this file you will be able to print M43/MTF to MD Lens Adapter with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on M43/MTF to MD Lens Adapter.