M3 x 25 Bolt

thingiverse

Created with Customizer! Instructions Using the following options: Nut thread resolution is 0.5mm. The outer diameter of the nut threads is 9mm. I chose a normal type nut. I specified a 45-degree shape for the step. Each thread advance is 0.5mm. The counter sink is 2 times the nut diameter. Head diameter is set at 5mm. Non-threaded section has no width. Nut diameter is fixed at 12mm. Wall thickness is set to 2mm. Nut height is set at 6mm. Slot depth for wing type bolt is 2mm. Type of fastener chosen is a bolt. Wing width of the slot is 1mm. No texture is used in this design. Non-threaded section length is zero. Outer diameter of the finished product is 14mm. Wing ratio has been set at one to one. Design resolution is set at 0.5mm. Inner diameter of the design is fixed at 8mm. Height of the bolt head is 2.5mm. Angle for the nut thread step is set at 45 degrees. The space between threads in the nut is 2 times the outer diameter of the thread. Diameter of drive or socket part is set to 5mm. Type of drive or socket chosen is a socket. Outer thread diameter for driving tool is 3mm. Thread length is set at 25mm. Surface quality chosen has 6 smooth facets. Head style of bolt or fastener is hex.