M15A RS415 Suzuki Swift Cruise Control Pulley

cults3d

This is a 3D printable Suzuki Swift Cruise Control Pulley to suit a 2010 RS415 EZ Suzuki Swift with M15A Engine. I designed it to install an Autostrada cruise control kit. There are two parts (Drive Plate and Pulley) which are fastened together using two (2) M6 x 25 socket head cap screws and two M6 brass threaded inserts. The inserts were installed with a soldering iron. The rear drive plate presses onto the original metal drive dogs on the rear of the throttle pulley. Two M6x12 brass threaded inserts are thermal-set into this part by a soldering iron. Once the drive plate is installed to the original throttle pulley, the cruise pulley is fastened to the drive plate with the cap screws. I uploaded it in the hopes it can be of value to someone else, perhaps saving them some time. I printed this cruise pulley in PETG with no operational issues. I had the intention of printing it in PC if there were any problems with creep. However it seems like that may not be necessary.