M&Ms

thingiverse

This is a custom 3D printing model generated from the Thingiverse platform. It's been modified using the Customizer tool. The instructions for building this model can be found below: Building This Model ------------------- You will need the following materials and tools to build this customized version of the M&M`s display: Materials: * Printing material of your choice * Supporting structure or base plate Tools: * 3D printer * Scissors (for removing excess supports) * Sandpaper (optional, for smoothing out surface roughness) Step 1: Prepare Your Printer ----------------------------- Make sure your 3D printer is properly calibrated and configured before starting the print process. The default settings may need to be adjusted according to your specific printer model and printing material. Step 2: Slice and Print ------------------------- Open your slicer software and load the STL file of the customized model. Set up the printing parameters, including layer height, infill density, and support structure configuration. Then, slice the model into individual layers for optimal printability. Once slicing is complete, start the print process according to the specified settings. Step 3: Remove Excess Supports -------------------------------- After the print has finished, remove any excess supports using scissors or a hobby knife. Take your time to carefully dissect the structure and release the supporting rods. Step 4: Refine and Touch-up (Optional) -------------------------------------- If you notice surface roughness or uneven layer adhesion, lightly sand the model using fine-grit sandpaper. Be cautious not to remove too much material during this process. Assembly ---------- Once all individual parts have been printed, proceed with assembly according to your customized configuration settings. Troubleshooting and Tips ------------------------- Be aware that printing a custom object can sometimes result in errors or discrepancies between design intent and actual output. To avoid common pitfalls: * Check for adequate infill density to maintain structural integrity. * Use suitable support material and configure the supports correctly according to your model's geometry. * Experiment with different print resolutions, speeds, and temperatures until achieving desired quality and surface finish. Remember to stay patient throughout the printing process. A well-executed customized display awaits you once all the individual components are assembled in harmony with the intended design intent!