Lüftergehäuse R1

thingiverse

What You Need for the Fan Housing R1 for Wlanthermo To get started, you will need a few things: - For example, a Titan fan 50 x 50 x 15 - Eight Stab magnets 3 x 6mm - One M3 plastic screw (which must be cut down with a knife to the right size) - Two M3 stainless steel screws xxmm - Two M3 6mm stainless steel screws - Two M3 stainless steel nuts - Two O-rings for the Guru adapter 2.5 x 25mm Note: It usually makes sense to use a tap to re-tap the M3 threads in the housing and plug before inserting a screw, otherwise it's possible that the pressure will be damaged. The eight holes for the Stab magnets should also be checked beforehand, possibly with a 3mm drill bit to clean them up. ... all depending on the quality of the pressure... Links: - Connector https://www.reichelt.de/einbaukupplung-fuer-hohlstecker-aussen-5-6mm-innen-2-1mm-lum-1614-19-p237595.html?&nbc=1 - Plug https://www.reichelt.de/hohlstecker-mit-verriegelung-aussen-5-5-mm-innen-2-1-mm-dc-st-072690-p202900.html?&nbc=1 or https://www.reichelt.de/hohlstecker-mit-verriegelung-aussen-5-5-mm-innen-2-1-mm-dc-st-072690-p202900.html?&nbc=1 - Fan 12V radial 50x50x15mm, for example https://www.amazon.de/dp/B01JJ0QD6Q/ref=cm_sw_em_r_mt_dp_U_qi35Eb2FHR1SF