Lulzbot Taz 6 Electronics Case - Case Mount Offset Relocation for Extra Chassis Reinforcement

thingiverse

Welcome! The Taz 6 has a relatively simple frame reinforcement system. When printing, minor shifts in the frame can affect print quality. On the Taz Pro, Lulzbot added internal 90-degree corner brackets to all corners of the frame. I wanted to do the same for the Taz 6, but unfortunately, the mounts for the Electronics Case were in my way. That's when this mod came into play. Print this mod with ABS on a 0.33mm layer height with 95% infill. IMPORTANT NOTE: The "Top" mounts must have the tab facing upwards. If you install them with the tab facing downwards, the Left Z-axis bearing assembly will hit the mount before the Z-stop endswitch and may cause axis misalignment or damage. As always, all of this is done at your own risk. Remove the old mounts, install these new ones (be careful not to let the t-nuts slide!), and then you can add additional corner brackets to stiffen the frame! On the Taz Pro, they also upgraded their outside mount corner brackets, so I upgraded those as well with similar ones from Amazon. The corner parts I used to upgrade the Taz 6 (with this mod's help) were: - Boeray 2028 Black Aluminum Corner Bracket (https://www.amazon.ca/gp/product/B077S696P7/) - Boeray Black L Shape 2020 Aluminum Extrusion Corner Bracket Outside Joining Plate (https://www.amazon.ca/gp/product/B07HF8TRNS/) As always, this mod is done at your own risk. I accept no responsibility for its use. This may also void your warranty with Lulzbot. Happy modding!